Instrument Features
Adopt microcomputer control, with reasonable internal structure,
beautiful appearance, small size, light weight;
Structure design is more lightweight, operate conveniently on-site;
With over temperature protection device, the controller will
automatically cut off the high voltage ,to avoid damaging the X -
ray tube due to high temperature;
mA (mA) stable unit can change with X ray tube filament voltage to
adjust the unidirectional pulse frequency, to ensure the stability
of X ray tube current ;
KV (kV) control unit can continuously control the tube voltage
level, to adapt to the radiography requirements of different
material ;
Anti interference circuit can effectively reduce the high voltage
impulse of X ray generator to control system;
Complete protection functions and the fault types can be displayed;
The working time and rest time of the detector is in strict
accordance with the proportion of 1:1;
Delayed high pressure start function, convenient for the operator
to leave the dangerous area;
The high pressure and control are isolated to keep the generator
work more safe and reliable;
Special testing power grid and voltage function,suitable for
generator unit
Standard Configuration
| NO. | Name | QTY | Remarks |
| 1 | X ray flaw detector | 1 | |
| 2 | controller | 1 | |
| 3 | Connection cable(10 cores) | 1 | |
| 4 | Power cable(2 cores) | 1 | |
| 5 | Ground lead | 1 | |
| 6 | Fuse(3A) | 5 | |
| 7 | Attached files | 1 | |
The Emission of X-ray
Figure 1 Figure 2
Figure 3 Figure 4
Figure 1:Glass tube circumferential target generator
Figure 2:Ceramic tube directional generator
Figure 3:Glass tube circumferential cone target generator
Figure 4:Glass tube directional generator
Working Conditions
| Environment temperature | -25℃-40℃ |
| Relative humidity | <85% |
| Safe work pressure | 0.35-0.50mPa |
Note, Do not use when the pressure is under 0.35mPa
Generator Appearance
1 Gas pressure gauge 2 Cable line socket
3 Caution light 4 X ray generate area
5 Cooler fan
Controller Appearance
1 Fault code and exposure chart 2 Standby light
3 HV light 4 Digital display
5 Time knob 6 KV presetting knob
7 “HV on” key 8 “HV off” key
9 Power switch 10 Connection cable socket
11 Power cable socket 12 Earthing wire
13 Fuse holder(3A)
The main parts in the controller are:KV control panel, mA control
panel, microcomputer control panel, protection board, Controllable
silicon high voltage module, LC filter, main,assistant silicon
control inverter system. The inner controller has cooling fans,
vent-windows on the side and back.
