Mitech MCT200Coating Thickness Gauge with high sensitivity and for
easy operation
Product Overview
MCT200 Coating Thickness Gauge is designed for non-destructive,
fast and precise coating thickness measurement and also can measure
the film thickness. It is widely used in manufacturing,metal
processing industry, chemical industry.commodities inspection and
other testing areas. Measuring range from 0 to 10 mm, can meet the
different industries in view of the workpiece surface coating
thickness testing requirements. It is the necessary professional
precision instrument to improve the production efficiency and the
qualified rate, saving the cost of production.
Function & application
Five types of probes are available for different application,probe
contact parts with the hard chrome or red ruby materials, very
durable.
With different external probes,the gauge can be applied to
measuring thickness of
non-magnetic coating on magnetic metal substrate,as well as
non-conductive coating on non-magnetic metal substrate.
Two calibration methods can be applied to the gauge and the system
error of the probe can be corrected with the basic probe
calibration method.
Two measuring modes: single or continuous, changeable.
Measuring status indicator shows the measuring status.
EL display back light ensures easy reading of screen data in low
light conditions.
Battery information indicates the rest capacity of the battery.
Auto sleep and auto power off function to conserve battery life.
USB1.1 communication port.
Optional software to process the memory data on the PC.
Compact aluminum case, suitable for use under poor working
conditions.
Working Principle
Measuring principle: Magnetic induction & Eddy current.
With different external probes, the gauge can be applied to
measuring thickness of non-magnetic coating on magnetic Metal
substrate,as well as non-conductive coating on non-magnetic metal
substrate.
Working Conditions
Working temperature: -10℃～＋50℃.
Storage temperature: -30℃～＋60℃.
Relative humidity: ≤90％.
The surrounding environment should avoid of vibration, strong
magnetic field, corrosive medium and heavy dust.
Instrument Features
Five types of probes(F400,F1, F10,N1,CN02) are available for
different applications, F10 probe measures up to 10mm.
With different external probes, the gauge can be applied to
measuring thickness of non-magnetic coating on magnetic metal
substrate, as well as non-conductive coating on non-magnetic metal
substrate.
Two calibration methods can be applied to the gauge.The system
error of the probe can be corrected with the basic probe
calibration method.
Two measuring modes: single or continuous, changeable.
Measuring status indicator shows the measuring status.
Measured values and user information are shown on a large,
easy-to-read LCD.The display back light ensures easy reading of
screen data in low light conditions.
Battery information indicates the rest capacity of the battery.
Auto sleep and auto power off function to conserve battery life.
USB1.1 communication port, optional software to process the memory
data on the PC.
The gauge equips with data-pro software, can do measurement results
transmission, automatic storage management, measurement data
analysis, measurement reports print etc.
Compact aluminum case, suitable for use under poor working
conditions.
Operating Method and Attentions
When the instrument is off, press CAL then press start, with a
beep, enter the calibration mode, set the probe zero point.
Test on the specimen, use up/down to retify the valus, then follow
the step on the other four slices. In asending order, such as, 50,
100, 200, 400, 800μm. The instrument should avoid humidity, unplug
the plug with care, keep clean.
Instrument Maintenance
The battery should be changed when almost out, used batteries must
be removed from the gauge without delay to avoid leakage, please
take out the batteries when not using.
The calibration substrate should avoid scratch, rust.
